Menu

Catalog

Items listed in the catalog are not currently in

stock.  Please select "Weapons" category for all in stock

firearms.

View as Grid List
Sort by
Display per page

EraThr3 16" Stainless Rifle Custom Gray/Orange Distressed

$2,850.00
We're proud to offer the most refined rifles on the planet. And after months of R&D, we've developed multiple configurations that cover a broad range of requirements, yet focus on one thing... Absolute dominance in the marketplace. EraThr3 gas guns are assembled with a free-float handguard, single-point cut 416R PROOF Research barrel, and a hand-selected group of top top-notch component parts. Meticulously built on our own billet receivers, each assembly is hand finished and proven on the range prior to delivery.

Agency Arms TWC 19 BONESAW BARTSO Barrel

$2,795.00 $2,694.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Modern Outfitters MC6 .300BLK PDW-SD PISTOL MC

$2,899.00 $2,699.00
When designing the MC6 Modern Carbine™, we had various missions that we set out to accomplish. Our primary goals were to use the highest grade materials available and the most precise manufacturing processes. We also wanted to design a rifle that was lightweight, accurate, and extremely reliable in the most adverse conditions. With the MC6, we believe that we accomplished these missions. Depending on the configuration, the MC6 weighs in at or under 6.0 pounds and has solid billet CNC machined construction for tighter tolerances and increased accuracy. Standard features on all MC6's include enhanced controls, our sub-MOA guaranteed barrels, customer's choice of a solid Cerakote color, premium padded rifle cases, and a suppressor-ready mount.

Modern Outfitters MC6 .300BLK 8" PISTOL DISTRESSED TUNGSTEN

$2,599.00
When designing the MC6 Modern Carbine™, we had various missions that we set out to accomplish. Our primary goals were to use the highest grade materials available and the most precise manufacturing processes. We also wanted to design a rifle that was lightweight, accurate, and extremely reliable in the most adverse conditions. With the MC6, we believe that we accomplished these missions. Depending on the configuration, the MC6 weighs in at or under 6.0 pounds and has solid billet CNC machined construction for tighter tolerances and increased accuracy. Standard features on all MC6's include enhanced controls, our sub-MOA guaranteed barrels, customer's choice of a solid Cerakote color, premium padded rifle cases, and a suppressor-ready mount.

Agency Arms M&P 9 Black T-800 2-Tone ARMOR

$2,514.00 $2,414.00
Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group. Slide Work All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. Frame work We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms 19 G4 BONESAW DTF DLC

$2,299.00 $2,199.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.