Menu
      • Features TEN-TAP® Programming – Choose from three user selectable programs:
        1.) high/strobe/low; 2.) high only; 3.) low/high
      • Accepts a single lithium or alkaline battery
      • CR123A lithium battery output:
        • High for bright light: 350 lumens; 6,400 candela; 160m beam; runs 1.5 hours
        • Low for longer run time: 40 lumens; 720 candela; 53m beam; runs 14.hours
        • Strobe for signaling or disorienting: runs 3 hours
      • AA alkaline/lithium battery output:
        • High: 150 lumens; 2,750 candela; 105m beam; runs 1 hour 20 minutes (alkaline);  runs 4.25 hours (lithium)
        • Low: 40 lumens; 720 candela; 53m beam; runs 7.5 hours (alkaline);  runs 14 hours (lithium)
        • Strobe for signaling or disorienting: runs 3.5 hours (alkaline); runs 8 hours (lithium)
      • Solid State power regulation provides maximum light output throughout battery life
      • Includes nylon holster, one CR123A lithium battery and one “AA” alkaline battery (also accepts one “AA” lithium battery)
      • Durable, anodized aluminum construction with impact-resistant tempered glass lens
      • IPX7 waterproof to 1 meter for 30 minutes; 2 meter impact resistance tested
      • Rubber push-button tail switch
      • Unbreakable pocket clip
      • Anti-roll head
      • 4.25” (10.8 cm); 2.5 oz (71g) with CR123 battery; 2.8 oz (79g) with AA alkaline battery; 2.4 oz (68g) with AA lithium battery
      • Limited lifetime warranty
      • RoHS compliant

Availability: Out of stock

Manufacturer: Streamlight
$68.00
$45.00
$40.50
- +
      • Features TEN-TAP® Programming – Choose from three user selectable programs:
        1.) high/strobe/low; 2.) high only; 3.) low/high
      • Accepts a single lithium or alkaline battery
      • CR123A lithium battery output:
        • High for bright light: 350 lumens; 6,400 candela; 160m beam; runs 1.5 hours
        • Low for longer run time: 40 lumens; 720 candela; 53m beam; runs 14.hours
        • Strobe for signaling or disorienting: runs 3 hours
      • AA alkaline/lithium battery output:
        • High: 150 lumens; 2,750 candela; 105m beam; runs 1 hour 20 minutes (alkaline);  runs 4.25 hours (lithium)
        • Low: 40 lumens; 720 candela; 53m beam; runs 7.5 hours (alkaline);  runs 14 hours (lithium)
        • Strobe for signaling or disorienting: runs 3.5 hours (alkaline); runs 8 hours (lithium)
      • Solid State power regulation provides maximum light output throughout battery life
      • Includes nylon holster, one CR123A lithium battery and one “AA” alkaline battery (also accepts one “AA” lithium battery)
      • Durable, anodized aluminum construction with impact-resistant tempered glass lens
      • IPX7 waterproof to 1 meter for 30 minutes; 2 meter impact resistance tested
      • Rubber push-button tail switch
      • Unbreakable pocket clip
      • Anti-roll head
      • 4.25” (10.8 cm); 2.5 oz (71g) with CR123 battery; 2.8 oz (79g) with AA alkaline battery; 2.4 oz (68g) with AA lithium battery
      • Limited lifetime warranty
      • RoHS compliant
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Customers who bought this item also bought

Agency Arms 19 G4 Green Frame Urban DLC

$2,149.00 $1,934.10

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.