Trijicon RMR Sight Adjustable (LED) - 3.25 MOA Red Dot RM06 TYPE 2 Coyote Brown

Manufacturer: Trijicon

$600.00

Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) is designed to be as durable as the legendary ACOG. The RM06 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. With eight available brightness settings, the reticle can be manually adjusted by pressing the plus or minus buttons on either side of the unit. To switch to auto adjust mode simply press both buttons simultaneously and release. To save battery life, turn the optic off by pressing both buttons simultaneously and holding for 3 seconds. The Trijicon RMR is tougher than any alternative and suitable for military, law enforcement and hunting applications.

Availability: Out of stock

Qty:

+ -

Overview
Contact Us

NEW TYPE 2 MODEL

Magnification	1x
Bullet Drop Compensator	No
Length (in)	45mm
Weight (oz)	1.2 oz w/Battery
Illumination Source	LED
Reticle Pattern	3.25 MOA Dot
Day Reticle Color	Red
Night Reticle Color	Red
Bindon Aiming Concept	No
Adjustment @ 100 yards (clicks/in)	1.0
Housing Material	Forged Aluminum
Batteries	1 CR2032 Lithium Battery
Battery Life	Over 4 years of continuous use (when used at 70ºF (21ºC)) at setting 4 of 8. *Extreme temperatures (high or low) will affect lithium battery performance.

Your name *

Your email *

Inquiry *

Customers who bought this item also bought

LWS x Veil G19 Gen 3 Tomahawk Ported Slide Tano RMR with Barrel

Designed by Landers Weapon Systems with Chris Woomer of Veil Solutions, this Tomahawk combo features a Tano Cerakote stripped slide with a ported/nitrided barrel, direct milled optic cut, and LWS Co-Witness Blackout Sights.

$895.00

Trijicon RCR Red Dot Sight OD Green Cerakote - 3.25 MOA Enclosed Adjustable LED

$900.00

Agency Arms Trijicon® RMR AOS Plate

This plate is made specifically for the Trijicon RMR optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

AOS Trijicon® RMR Plate sold as a single plate in either Rear Iron Forward of the RMR or Rear Iron Behind the RMR

Includes fasteners for the adapter plate and optic.

Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.

Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.

Please note: While the 507C/508T have the same footprint as the Trijicon RMR, it utilizes shorter fasteners. If you are purchasing this plate to install on a 507C/508T, you will need to purchase shorter screws here

$115.00