DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Customers who bought this item also bought
Titanium screws for mounting a Trijicon RMR on an Agency Slide.
For Glock®: (1 Long Screw and 1 Shortened Screw) They are installed by placing the long screw on the left and the short screw on the right. Please do not install them in reverse or it will cause your weapon to fail to extract rounds properly.
For M&P: (2 Equal length screws)
This plate is made specifically for the Trijicon RMR optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.
AOS Trijicon® RMR Plate sold as a single plate in either Rear Iron Forward of the RMR or Rear Iron Behind the RMR
Includes fasteners for the adapter plate and optic.
Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.
Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.
Please note: While the 507C/508T have the same footprint as the Trijicon RMR, it utilizes shorter fasteners. If you are purchasing this plate to install on a 507C/508T, you will need to purchase shorter screws here
This plate is made specifically for the 509T optic footprint. It comes with the adapter plate and a set of screws to mount the plate to your AOS milled slide (screws not needed to attach optic to plate, just picatinny clamp mount).
AOS Holosun 509T Plate sold as a single plate in either Rear Iron Forward of the RMR or Rear Iron Behind the RMR
Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.
Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.
